At Unicorn Motor Developments, we specialise in bespoke ECU remapping for Audi vehicles. Our in-house developed software is tailored to your engine’s unique specifications, optimising performance for upgrades such as larger injectors, upgraded MAFs, and bigger turbos.
Unlock your Audi’s full potential with expert tuning that enhances power, efficiency, and drivability. Contact us today to discuss your remapping requirements!
SPREAD THE COST WITH
Model | Engine | Tune | Price inc VAT |
---|---|---|---|
1.6 2.0 Diesel | Stage 1 Engine only | £449.00 | |
1.6 2.0 Diesel | Stage 1 engine and TCU | £625 | |
3.0 Diesel | Stage 1/2 | £499/£599 | |
3.0TDI | Stage 1/2 engine and TCU | £675/£775 | |
3.0TDI | Stage 1/2 engine and TCU | £675/£775 | |
3.0TDI | Stage 1/2 engine and TCU | £675/£775 | |
1.0 1.2 1.4 1.5 1.8 | Stage 1 | £499 | |
1.0 1.2 1.4 1.5 1.8 | Stage 1 Engine and TCU | £675 | |
S3 | Stage 1 | £499 | |
S3 | Stage 2 | £599 | |
S3 | Stage 3 | From £899 | |
2.5TFSI | Stage 1 engine and DSG | £999.00 | |
2.5TFSI | Stage 2 | 1099 | |
2.5TFSI | Stage 3 | From £1299 | |
2.5TSI | Stage 1 engine and DSG | £999 | |
2.5TSI | Stage 2 engine and DSG | £1099 | |
2.5TSI | Stage 3 | from £1500 | |
2.7T 265bhp | Stage 1 | £499.00 | |
2.7T 265bhp | Stage 2 | £599.00 | |
2.7T 265bhp | Stage 3 | From £699 | |
2.7T 380bhp | Stage 1 | £549.00 | |
2.7T 380bhp | Stage 2 | £599.00 | |
2.7T 380bhp | Stage 3 | From £699 | |
3.0TFSI | Stage 1 | £499 | |
3.0TFSI | Supercharger Pulley or <187mm crank pulley | £699 | |
3.0TFSI | Twin Pulley Tune/>187mm single pulley | £799.00 | |
3.0TSI V6 | Stage1/2/3 | £899/£999/from £1499 | |
2.9T | Stage1/2/3 | £899/£999/from £1499 | |
4.0TFSI | Stage 1/2 engine and TCU | £999.00 | |
4.0TFSI | Stage 1/2 engine and TCU | Stage 1 £999.00 Stage 2 £1099 | |
All | Please Contact | From £699 | |
2.0TFSI | Stage 1/2/3 | £499/£599/from £799 | |
4.0T | Stage 1/2/3 | £899£/£999/from £1500 | |
£499.00 | |||
4.0T | Stage 1/2/3 Engine and TCU | £999£/£1099/from £1600 | |
3.0TDI | Stage1/2 Engine & TCU | £899/£999 |
All power figures are a typical average. Our 4wd Dyno undergoes a very strict calibration regime, and therefore reads lower than the vast majority of other Dyno's. We employ proper strapping techniques to ensure that the car does not climb up off the rear roller and generate false inflated power figures.
Extended testing can be carried out at Bruntingthorpe Proving Ground as required
All software if developed in house and custom written for your specific Audi. We can tailor the map to suit any particular requests, so please contact us for information.